Home > Civil >  Components of Road structure

 Components of Road structure

 What are the Components of Road structure?

In this article will study about components of the roads and the structure of the roads and its composition after reading this article you will understand a lot about components of the road structures. We will try to make it as simple it can be.

Components of Road Structure

There are few component of road structure which are going to be discuss below which are as follows:

  • CARRIAGEWAY
  • FORMATION WIDTH
  • KERB
  • ROAD MARGIN
  • MEDIANS
  • CAMBER
  • RIGHT OF WAY

Carriage Way:

Carriageway is the width of the road on which traffic moves without any restriction.it generally consist of traffic lines and the width of carriageway depend on the lines of traffic. Traffic lines are those lines on which traffic can move freely without any restriction. Each country has its own rules for the width of carriageway for insistence how long should it be in some country for single line road its 2.44m in some its more than that for two line its 3.75m in some more then that.  

Formation Width:

The formation width of road is the sum of carriageway, shoulders and separators (if there is any).

Kerb:

Kerb is the boundary line formed from stone or concrete block which separate the carriageway form footpath. There are different types of kerb with different types of height. There are four type of kerb which are low or mountable Krebs, semi-barrier kerb, barrier kerb, and submerged kerb. Iow kerbs are used for traffic to remain in line and also separate the shoulder from the road so the driver can enter the shoulder area with little difficulty its height is 10cm (4inch). A semi barrier kerb has height of 15cm (6inches). Barrier kerbs has a height of 20cm (8 inch). They are provided where pedestrian traffic is in considerable amount. Submerged kerb are used in rural roads the basically provide stability to the road pavement.

Road Margin:

 The part of road except carriageway are usually called road margin, it includes different parts or element of road which are given below

  • Shoulders
  • Bus bays
  • Parking lines
  • Sidewalks or footpaths
  • Service roads
  • Cycle track
  • Guard rails
  • Drive way
  • Frontage roads

Shoulders:

Shoulders is a part of formation width except carriage way.  Provided alongside the carriageway it’s basically a road for an emergency use for ambiance in rush hour or to stop a vehicle for repairing propose, and it can be used for the extension of road in future. The width of the shoulders is kept in between 2.5 m to 4.6 m.

Bus Bays:

Bus bays or bus stops are stationed on the side of road where the bus can stop safely to pick up passengers or drop off without disturbing the traffic flow they are provided at least 75m (250 feet) away from intersection of road.

Parking Lines:

In urban roads they usually provided parking on the road side and parallel parking is preferred because it does not disturb the traffic flow. Its width is 3m(10feet).

Sidewalks or Footpath:

Sidewalks and footpath is a same word When there is heavy amount of traffic and pedestrian flow a special paved area is provided for the pedestrian to walk safely on it without any accident.

Service Road:

Service roads are provided parallel to the main road and also connect to main highway, expressway. They are separated from the main road and are connected to highway at selected points. They are provided to not disturb the traffic flow.

Cycle Track:

Cycle track are provided in those areas where the cycle traffic volume is high than width of the cycle track is kept between 2 to 3 m or in other words (6 to10 feet).

Guard Rails:

Guard rails are usually provided on the shoulder of the road. If the fill is more than 3m (10 feet) they are provided. Their main is purpose to restrict them from falling of the road and to prevent them from serious accident. Guard rails are made of different types and in different shapes they are either made of steel, concrete or stone. They are painted white or yellow for better visibility.

Medians:

Medians are provided to isolate traffic. Their main area purpose is to restrict the collision of traffic that are moving in opposite direction of one another.

Camber:

Camber or cross slope is provided in the middle of road or carriageway for the drainage of rain water form road surface. The main purpose of camber is to prevent water from entering to the subgrade of the road, the road quickly dries which prevent the traffic from slipping off the road which decrease the accident rate. The height of camber depends upon the material of road and the intensity of rain fall in the region. The value of the camber varies from 1 to 25 or 1 to 50.

Right of Way:

Right of way is the total land require for the construction of road. Which include carriages way, foot path, and future extension. The right of way depends upon the importance of the road for the future extension.

Drive Way:

Drive way join the highway with commercial organizations or buildings such as gas station, filling station, gasoline station, petrol station etc.

Frontage Roads:

Frontage Roads is constructed to give acquire properties along an essential highway. It may be run parallel to the highway & segregated by separators.

You may also read:

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *